How to Put on a Flat Chastity Cage

Step-by-Step Guide

Flat chastity cages are designed to prevent erections while maintaining a lower profile than traditional chastity devices. These devices provide a snug, minimalist fit, making them discreet under clothing and comfortable for longer wear. However, proper application is essential to avoid discomfort or injury. Here's an in-depth guide to putting on a flat chastity cage, ensuring both comfort and security.

1. Gather Your Supplies

Before you start, make sure you have everything you need to ensure a smooth and comfortable fit:

• Flat chastity cage (with the base ring and cage section)
• Lubricant (preferably water-based or silicone-based for sensitive areas)
• Locking mechanism (keyed lock, integrated lock, or plastic seal)
• Warm water and a towel (for pre-cleaning)

Pre-cleaning both your body and the chastity device is essential for hygiene, especially if you're planning long-term wear.

2. Warm Up the Body

Since the scrotum and penis are more pliable and easier to manage when warm, start by taking a warm shower or placing a warm towel over the area for a few minutes. This will allow the skin to relax, making the installation of the cage much easier. The relaxed scrotum and penis will be easier to maneuver through the base ring without discomfort.

3. Attach the Base Ring

The base ring is the first and most important part of any chastity device. It sits behind the scrotum and around the penis, holding the cage in place securely. Here's how to fit it:

• Step 1: Place one testicle through the base ring, gently pulling it through. The relaxed warmth will help stretch the scrotum and make this easier.
• Step 2: Gently pull the second testicle through the base ring. Be cautious and avoid pinching or excessive force—this should be smooth and comfortable.
• Step 3: Pull the flaccid penis through the base ring. Make sure the penis is entirely inside the ring, with no pinching or discomfort.

The base ring should feel snug but not tight. You should be able to slide a finger between the ring and the skin to ensure it’s not cutting off circulation.

4. Apply Lubrication

Once the base ring is in place, apply a small amount of lubricant to both the penis and the inside of the cage. Lubrication is critical to ensure that the skin slides into the cage comfortably and to prevent friction that could cause irritation.

• Silicone-based lubricant works best for long-term wear, as it lasts longer and reduces friction. However, if you're planning on using latex-based toys or accessories later, opt for water-based lubricant instead to avoid damaging the material.

5. Insert the Penis into the Cage Section

Now that the base ring is on and the lubrication is applied, it’s time to guide the penis into the cage section of your flat chastity device.

• Step 1: With your flaccid penis properly lubricated, carefully place the tip of your penis into the opening of the cage.
• Step 2: Gently guide the rest of the penis into the cage, ensuring that it fits snugly inside. For flat cages, the lower profile means the penis will lay closer to the body, keeping erections at bay more effectively.
• Step 3: Once the penis is fully inserted, check to make sure that no skin is pinched between the cage and the base ring.

6. Lock the Device

With the base ring and cage securely in place, it’s time to lock the device. Depending on your specific flat chastity cage, you may be using a traditional padlock, integrated lock, or disposable plastic seals.

• Step 1: Align the locking mechanism between the base ring and the cage.
• Step 2: Secure the lock in place, making sure that it is fastened tightly. If using a padlock, give the key to your keyholder or store it somewhere safe.
• Step 3: Test the fit by moving slightly to ensure there’s no pinching or discomfort.

Flat chastity devices typically create a tight, low-profile fit, but ensure that there is enough room for the penis to move slightly within the cage to avoid excessive constriction.

7. Check for Comfort and Adjust

After securing the lock, check your comfort level. You should be able to wear the device without pain or excessive tightness. Walk around, sit down, and adjust your body position to ensure that the device feels secure without causing discomfort.

• Check Circulation: Make sure that the penis and scrotum are not turning blue or feeling cold, as this could indicate restricted blood flow.
• Test Comfort: Adjust the cage or base ring if necessary. If the device is causing irritation, apply more lubricant or consider trying a different size or style of ring.

8. Hygiene Considerations

For long-term wear, hygiene is essential. Flat chastity cages often have fewer gaps, which can make cleaning more challenging. Be sure to:

• Clean the device daily, even while wearing it. Use a handheld showerhead or a syringe filled with warm soapy water to clean underneath the cage.
• Dry the area thoroughly after cleaning to avoid moisture buildup, which can lead to irritation or infection.

9. Getting Out of the Cage

When it’s time to remove the flat chastity cage, unlock the device and gently pull it away from the body. Be sure to take your time, especially if the device has been worn for a long period, as the skin may be sensitive.

Flat chastity cages offer a discreet and comfortable option for maintaining control, with their sleek design ensuring a snug fit without drawing attention. By following the proper steps for application, you can ensure a smooth and secure experience while preventing discomfort or injury. From preparing with lubrication to locking the device securely in place, every step is crucial for a comfortable long-term wear.

Now, if you're ready to take the next step in your chastity journey, try out the Lollipop Cages here.